Call now

Kenmore Washer Drains Nonstop and Lights Go Out: Repair or Replace

Kenmore Series 100 top-load washer in Beverly Hills drained nonstop with dark lights. The water level sensor on the control board misread the tub. Board $350 plus $250 labor.

Kenmore Series 100 top-load washer control panel in a Beverly Hills apartment

This is a real service call in Beverly Hills. A returning client called because his Kenmore Series 100 top-load washer started acting strange. After one cycle the panel lights stopped coming on, and any cycle he started went straight to draining and never stopped.

Kenmore Series 100 top-load washer control panel in a Beverly Hills apartment

First check: the control board connections

We pulled the control board and reseated every connector. That did not help.

Why the washer drained nonstop

On this washer the water level sensor sits on the control board itself, connected to the tub by a small pressure hose. A washer that drains nonstop believes water is still in the tub. It cannot see that the tub is empty, so it never finishes the cycle. After we cleared the pressure hose and the sensor port, the washer came back to life and ran normally.

Repair or replace

That fix carries no guarantee. The sensor cannot be replaced separately, only as part of the control board. If it misreads again, the washer could overfill, and the client lives on the third floor above other units.

  • New control board: about $350.
  • Labor: $250.
  • Total: about $600.

For about $300 more the client chose a new washer, roughly $900. On an older budget washer in an upstairs unit, that is often the sensible call.

If your top-load washer drains constantly

  • Check the pressure hose for kinks or debris before assuming the board is dead.
  • If the lights go dark and the washer keeps draining, stop using it until it is checked.
  • In upstairs units, never leave a washer with an unreliable level sensor running unattended.

Vertex Appliance Repair does washer repair in West Hollywood and nearby areas, including Beverly Hills. Diagnostic visit $89, waived when you go ahead with the repair. 90-day warranty on parts and labor. California BEAR registration #A-50370. Call or text (323) 747-7098.

Vertex Appliance Repair on: Google · Yelp · Thumbtack · BBB · Facebook